Introduction To Noise Analysis

Introduction to Noise Analysis

Operational Amplifier Noise

Arthur Kay's exciting new publication is a must have for practicing, professional electrical engineers. This comprehensive guide shows engineers how to design amplifiers and associated electronics to minimize noise, providing tricks, rules-of-thumb, and analysis to create successful low noise circuits. Forget the classical textbook traps of equations, virtual grounds, and a lot of double-speak, the novel but educational presentation used here uses definition-by -example and straight-forward analysis. This is the ultimate reference book for engineers who don't have the time to read, since the concepts are presented in detailed pictures and then repeated in the text for those who like both. Operational amplifiers play a vital role in modern electronics design. Today, op amps serve as the interfaces between the digital world of microprocessors, microcontrollers, and other digital circuits and the analog "real world". If an analog signal must be amplified, conditioned, filtered, or converted to be used by a digital system, an op amp is almost always involved. Noise is an unwanted signal that will corrupt or distort the desired signal, and veteran engineers as well as new college graduates are often faced with a lack of experience in noise analysis for operational amplifiers. The author has created a publication that is packed with essential information, while still being accessible to all readers. - Clear, definition-by-example presentation allows for immediate use of techniques introduced - Tricks and rules-of-thumb, derived from author's decades of experience - Extreme use of figures for rapid absorption of concepts - Concise text explains the key points in all figures - Accessible to all types of readers - Analysis and design of low-noise circuits using op amps, including design tradeoffs for low-noise - Desktop reference for designing low-noise op amp circuits for novice to experienced engineers - Accurate measurement and prediction of intrinsic noise levels, using analysis by hand and SPICE simulation

Introduction to Membrane Noise

I started working on membrane noise in 1967 with David Firth in the Department of Physiology at McGill University. I began writing this book in the summer of 1975 at Emory University under a grant from the National Library of Medicine. Part of the writing was also done at the Marine Biological Laboratory Library in Woods Hole and in the Library of the Stazione Zoologica in Naples. I wrote this book because in the intervening years membrane noise became a definable subdivision of membrane biophysics and seemed to deserve a uniform treatment in one volume. Not surprisingly, this turned out to be much more difficult than I had imagined and some areas of the subject that ought to be included have been left out, either for reasons of space or because of my own inability to keep up with all aspects of the field. This book is written for biologists interested in noise and for physicists and electrical engineers interested in biology. The first three chapters attempt to bring both groups to a common point of understanding of electronics and electrophysiology necessary to the study of noise and impedance in membranes. These chapters arose out of a course given over a period of six years to electrical engineers from the Georgia Institute of Technology and biologists from Emory University School of Medicine.