Stochastic Water Demand Modelling For A Better Understanding Of Hydraulics In Water Distribution Networks

Stochastic Water Demand Modelling

Water quality processes in the drinking water distribution network are strongly influenced by the flow velocity and residence time of the water in the network. In order to understand how the water quality changes in the drinking water distribution network, a good understanding of hydraulics is required. Specifically in the periphery of the network, where customers are connected, the hydraulics can change rapidly. During the night time the water is almost stagnant and the residence time increases. In the morning, when everybody gets up and flushes the toilet and takes a shower, high flow velocities can occur. During the remainder of the day flow velocities are low. The stochastic endues model SIMDEUM was developed to simulate water use on a small time scale (1 s) and small spatial scale (per fixture). SIMDEUM enables a good model of flow velocities, residence times and the connected water quality processes in the water distribution network. Stochastic Water Demand Modelling: Hydraulics in Water Distribution Networks describes the requirements of hydraulics in water quality modelling and provides insight into the development of detailed residential and non-residential water demand models. The book illustrates the use of detailed demand models in water quality models with respect to the variation in residence times and the relation with particle accumulation and resuspension. The models are compared to measurements in several real drinking water distribution networks.

Stochastic Water Demand Modelling for a Better Understanding of Hydraulics in Water Distribution Networks

New Trends in Urban Drainage Modelling

This book addresses the latest research advances, innovations, and applications in the field of urban drainage and water management as presented by leading researchers, scientists and practitioners from around the world at the 11th International Conference on Urban Drainage Modelling (UDM), held in Palermo, Italy from 23 to 26 September, 2018. The conference was promoted and organized by the University of Palermo, Italy and the International Working Group on Data and Models, with the support of four of the world’s leading organizations in the water sector: the International Water Association (IWA), International Association for Hydro-Environment Engineering and Research (IAHR), Environmental & Water Resources Institute (EWRI) - ASCE, and the International Environmental Modelling and Software Society (iEMSs). The topics covered are highly diverse and include drainage and impact mitigation, water quality, rainfall in urban areas, urban hydrologic and hydraulic processes, tools, techniques and analysis in urban drainage modelling, modelling interactions and integrated systems, transport and sewer processes (incl. micropollutants and pathogens), and water management and climate change. The conference’s primary goal is to offer a forum for promoting discussions amongst scientists and professionals on the interrelationships between the entire water cycle, environment and society.