Eleven Stirling Engine Projects You Can Build

Eleven Stirling Engine Projects You Can Build

Presents eleven projects demonstrating how to build simple, fun, and educational Stirling engines from available kits.

Quick and Easy Stirling Engine

Do you know how to make a working engine from soda cans? You do now! The Quick and Easy Stirling Engine book will show you every detail you need to know. There are no difficult secrets and no expensive parts to buy. With two soda cans and a few other materials you can build a running engine in just a few hours.The engine featured in this book was designed for use in educational settings. Consulting with several educators, this engine was designed so that it could be assembled with simple hand tools by most builders in about three hours. The parts list is simple and affordable. Simple hand tools are all that is required for assembling this engine.Once assembled, the engine will spin a flywheel when the bottom is heated and ice is placed on top. This is a hot air engine design, sometimes referred to as a Stirling Engine. The engine makes motion by exercising a temperature differential. The bottom half of the engine must be warmed to about 250 degrees F, and the top of the engine must be cooled with cold water or ice. When these conditions are present, the engine will spin between 100 and 200 rpm.The primary components of this engine are soda cans, copper wire, and an old CD. The adhesive that is used for construction is readily available at hardware stores. This engine is a fun project for students, home builders, hobbyists, and anyone who wants to learn how to make their own hot air engine from soda cans.

1982 DOE Authorization