Effect Of Trailing Edge Geometry And Thickness On The Performance Of Certain Turbine Stator Blading

Effect of Trailing Edge Geometry and Thickness on the Performance of Certain Turbine Stator Blading

The experimental and analytical investigation included solid blades with five different trailing-edge thicknesses and four different trailing-edge geometries. One of the geometries was round, one was square, one was tapered from the suction surface, and the other tapered from the pressure surface. One of the trailing-edge thicknesses was sharp edged; the other four thicknesses were equivalent to about 5, 11, 16, and 20 percent of the blade throat width. The experimental results show increased efficiency loss for increased trailing-edge thickness for all trailing-edge geometries. The blade with round trailing edge, equal to about 11 percent of the blade throat width, had 60 percent more loss than the sharp-edged blade. For the same trailing-edge thickness, square trailing edges caused more loss than round trailing edges, and the tapered trailing edges caused about the same loss as the round trailing edges.

Effect of Trailing-edge Geometry and Thickness on the Performance of Certain Turbine Stator Blading

Effect of Trailing-edge Geometry and Thickness on the Performance of Certain Turbine Stator Blading