Technology Of Portland Cement And Blended Cements

Technology of Portland Cement and Blended Cements

Cement and Concrete Science and Technology

- Overview of Cement and Concrete - Research and Technology - Burnability and Clinkerization of cement Raw Mixes - Cement Manufacture - Modernization of Cement Plants for Productivity and Energy Conservation - Quality Control in Cement Plant - Improving Energy Efficiency in Portland Clinker - Chemistry and Mineralogy of Cement Clinker - The Low PH Value Cement in GRC - Blended Cements - Advanced Cement-Based Materials - The Physico-Chemical Foundations of Concrete - High Stregngth Concrete and Its Microstructure - Quality Control of Concrete

Sustainable Construction Materials and Technologies

The construction materials industry is a major user of the world’s resources. While enormous progress has been made towards sustainability, the scope and opportunities for improvements are significant. To further the effort for sustainable development, a conference on Sustainable Construction Materials and Technologies was held at Coventry University, Coventry, U.K., from June 11th - 13th, 2007, to highlight case studies and research on new and innovative ways of achieving sustainability of construction materials and technologies. This book presents selected, important contributions made at the conference. Over 190 papers from over 45 countries were accepted for presentation at the conference, of which approximately 100 selected papers are published in this book. The rest of the papers are published in two supplementary books. Topics covered in this book include: sustainable alternatives to natural sand, stone, and Portland cement in concrete; sustainable use of recyclable resources such as fly ash, ground municipal waste slag, pozzolan, rice-husk ash, silica fume, gypsum plasterboard (drywall), and lime in construction; sustainable mortar, concrete, bricks, blocks, and backfill; the economics and environmental impact of sustainable materials and structures; use of construction and demolition wastes, and organic materials (straw bale, hemp, etc.) in construction; sustainable use of soil, timber, and wood products; and related sustainable construction and rehabilitation technologies.