Supersonic Propulsion Simulation By Incorporating Component Models In The Large Perturbation Inlet Lapin Computer Code

Supersonic Propulsion Simulation by Incorporating Component Models in the Large Perturbation Inlet (LAPIN) Computer Code

Supersonic Propulsion Simulation by Incorporating Component Models in the Large Perturbation Inlet (Lapin) Computer Code

An approach to simulating the internal flows of supersonic propulsion systems is presented. The approach is based on a fairly simple modification of the Large Perturbation Inlet (LAPIN) computer code. LAPIN uses a quasi-one dimensional, inviscid, unsteady formulation of the continuity, momentum, and energy equations. The equations are solved using a shock capturing, finite difference algorithm. The original code, developed for simulating supersonic inlets, includes engineering models of unstart/restart, bleed, bypass, and variable duct geometry, by means of source terms in the equations. The source terms also provide a mechanism for incorporating, with the inlet, propulsion system components such as compressor stages, combustors, and turbine stages. This requires each component to be distributed axially over a number of grid points. Because of the distributed nature of such components, this representation should be more accurate than a lumped parameter model. Components can be modeled by performance map(s), which in turn are used to compute the source terms. The general approach is described. Then, simulation of a compressor/fan stage is discussed to show the approach in detail. Cole, Gary L. and Richard, Jacques C. Glenn Research Center RTOP 509-10-03...

Scientific and Technical Aerospace Reports