Introduction To Dynamics And Control Of Flexible Structures Pdf

Introduction to Dynamics and Control of Flexible Structures

Dynamics and Control of Structures

Robots, aerospace structures, active earthquake-damping devices of tall buildings, and active sound suppression are examples of the application of structural dynamics and control methods. This book addresses the structural dynamics and control problems encountered by mechanical, civil, and control engineers. Many problems presented in this book originated in recent applications in the aerospace industry, and have been solved using the approach presented here. Dynamics analysis and controller design for flexible structures require a special approach due to the large size of structural models, and because flexible structure testing and control typically requires massive instrumentation (sensors and actuators). But the rapid development of new technologies and the increased power of computers allows for the formulation and solution of engineering problems that seemed to be unapproachable not so very long ago. The modal approach was chosen in this book. It has a long tradition in structural engineering (see, e.g., [84], [87], and [26]) and is also used in control system analysis, e.g., [93]. Its usefulness, thoroughly tested, does not need extensive justification. Both structural testing and analysis give priority to the modal representation, due to its compactness, simplicity, and explicit physical interpretation. Also, many useful structural properties are properly exposed only in modal coordinates. In this book the modal approach, preferred by structural engineers, is extended into control engineering, giving new analytical results, and narrowing the gap between structural and control analysis.

Vibration Control of Active Structures

This book consists of 14 chapters. Chapters 2 and 3 are devoted to the dynamics of active structures; the open loop transfer functions are derived from the constitutive equations; the discussion includes active trusses with piezoelectric struts, and beams and shells with embedded laminar piezoelectric actuators and sensors. Chapters 4 and 5 discuss the virtues of collocated actuator/sensor configurations and how they can be exploited to develop active damping with guaranteed stability. Chapter 6 addresses vibration isolation for one and 6 d.o.f. Chapter 7 discusses optimal control for SISO systems with symmetric root locus. Chapter 8 discusses the design tradeoffs for SISO systems in the frequency domain, including the Bode amplitude/phase relationship. Chapter 9 provides a more general discussion of optimal control using of optimal control using the Riccati equation; spillover is examined. Chapters 10 and 11 review briefly the concepts of controllability, observability and stability. Chapter 12 discusses the semi-active control, including some materials on magneto-rheological fluids. Chapter 13 describes various practical applications to active damping, precision positioning and vibroacoustics, and chapter 14 discusses the active damping of cable- structures.