Ibm System I And System P System Planning And Deployment

IBM System i and System p System Planning and Deployment: Simplifying Logical Partitioning

Logical Partitioning (LPAR) provides the significant capability to run multiple operating systems, each a partition on the same physical processor, memory, and I/O attachment configuration. LPAR is often discussed along with the concept of server consolidation. LPAR enables management across a single set of hardware and, when configured and managed correctly, can maximize efficient use of hardware resources all in a single place, often using resources in one partition when not needed by another partition. By its nature, LPAR is powerful, but, as the number and complexity of applications being run in each partition increases, can become complex to configure and to achieve anticipated performance expectations. This IBM Redbooks publication describes and provides examples of using the 2007 enhancements to the system planning and deployment tools and processes for planning, ordering, and deploying a partitioned environment on IBM System i and IBM System p configurations. The objective is to help you order and IBM deliver a hardware configuration and get that configuration up and running your planned partition configurations with good performance in as short a time as possible. This book and the tools and processes involved represent the next step in expediting this entire process, while still requiring sound knowledge of IBM System i and System p hardware processor and I/O capabilities for success.

IBM System i and System P System Planning and Deployment

IBM Power Systems HMC Implementation and Usage Guide

The IBM® Hardware Management Console (HMC) provides systems administrators a tool for planning, deploying, and managing IBM Power SystemsTM servers. This IBM Redbooks® publication is designed for system administrators to use as a desk-side reference when managing partition-capable IBM Power Systems servers by using the HMC. The major functions that the HMC provides are Power Systems server hardware management and virtualization (partition) management. You can find information about virtualization management in the following documents: - A Practical Guide for Resource Monitoring and Control (RMC), SG24-6615 - IBM PowerVM Virtualization Introduction and Configuration, SG24-7940 - Implementing IBM Systems Director 6.1, SG24-7694 - Hardware Management Console V7 Handbook, SG24-7491 - IBM PowerVM Live Partition Mobility, SG24-7460 - IBM PowerVM Virtualization Managing and Monitoring, SG24-7590 - Converting Hardware Management Console (HMC) 7042-CR6 or 7042-CR7 Models to RAID1, REDP-4909 The following topics are described: - Plan to implement the HMC - Configure the HMC - Operate the HMC - Manage software levels on the HMC - Use service functions on the HMC - Update firmware of managed systems - Use IBM System Planning Tool deployments In addition, there is an explanation on how to use the new HMC graphical user interface and the new HMC commands that are available with HMC Version 7, Release 7, modification 60.