Generalized Theory Of Electrical Machines

The General Theory of Electrical Machines

The General Theory of Alternating Current Machines

The book on The General Theory of Electrical Machines, by B. Adkins, which was published in 1957, has been well received, as a manual containing the theories on which practical methods of calculating machine performance can be based, and as a text-book for advanced students. Since 1957, many important developments have taken place in the practical application of electrical machine theory. The most important single factor in the development has been the increasing availability of the digital computer, which was only beginning to be used in the solution of machine and power system problems in 1957. Since most of the recent development, particularly that with which the authors have been concerned, has related to a. c. machines, the present book, which is in other respects an up-to-date version of the earlier book, deals primarily with a. c. machines. The second chapter on the primitive machine does deal to some extent with the d. c. machine, because the cross-field d. c. generator servesas an introduction to the two-axis theory and can be used to provide a simple explanation of some of the mathematical methods. The equations also apply directly to a. c. commutator machines. The use of the word 'general' in the title has been criticized. It was never intended to imply that the treatment was comprehen sive in the sense that every possible type of machine and problem was dealt with.

Analysis of Electrical Machines

This book is devoted to students, PhD students, postgraduates of electrical engineering, researchers, and scientists dealing with the analysis, design, and optimization of electrical machine properties. The purpose is to present methods used for the analysis of transients and steady-state conditions. In three chapters the following methods are presented: (1) a method in which the parameters (resistances and inductances) are calculated on the basis of geometrical dimensions and material properties made in the design process, (2) a method of general theory of electrical machines, in which the transients are investigated in two perpendicular axes, and (3) FEM, which is a mathematical method applied to electrical machines to investigate many of their properties.