Finite Element Analysis Of A Reinforced Earth Wall

Finite Element Analysis of a Reinforced Earth Wall

Finite Element Analysis of a Reinforced Earth Wall

Reinforced earth consists of a soil mass whose engineering characteristics and performance have been improved by the introduction of small quantities of frictional material that processes a relatively high tensile strength. The analysis of a reinforced earth system which incorporates metal strips placed at known intervals in the vertical and transverse directions within the soil mass is a complex problem. The complexity arises from the fact that reinforced earth is a three-dimensional problem and cannot be solved without imposing simplification with regard to the mechanical behavior of the system as well as the constitutive relationship governing the interaction between various components of the reinforced earth mass. The investigation reported herein describes a simplified approach for analyzing the instrumented reinforced earth wall which was previously constructed and loaded to failure at the U.S. Army Engineer Waterways Experiment Station. The three-dimensional problem was approximated by a structurally equivalent two-dimensional system and a two-dimensional finite element method was used in the analysis. The nonlinear behavior of the earth fill of the reinforced earth wall was simulated by hyperbolic formulation. The behavior of the metal skin element and reinforcing strips was assumed linear elastic until the yield stress was reached; thereafter, these metal components were assumed to fail plastically. Interface elements, to accommodate slippage between components of the reinforced earth wall, were also employed in the analysis. (Author).

Performance of Reinforced Soil Structures

The following is just a selection of the contents - Theory and design related to the performance of reinforced soil structures - A study of the influence of soil on the reinforcement load in polymer grid reinforced soil structures - Cellular retaining walls reinforced by geosynthetics:behaviour and design - The results of pull out tests caried out in PFA on a reinforced and unreinforced soil walls - In-situ techniques of reinforced soil - Design and field test on reinforced cut slope - Reinforcing a sand slope surrorting a footing using steel bars - Discussion of papers in session 4 - Effect of reinforcement in embankment - Session Summary