Embedded Microcontroller Interfacing For M Cor Systems

Embedded Microcontroller Interfacing for M-COR ® Systems

The "M·CORE" family of microprocessors is the latest 32-bit integrated circuit from Motorola designed to be a multi-purpose "micro-controller." The processor architecture has been designed for high performance and cost-sensitive embedded control applications with particular emphasis on reduced power consumption. This is the first book on the programming of the new language instruction set using the M·CORE chip.Embedded Microcontroller Interfacing for M·CORE Systems is the third of a trio of books by G. Jack Lipovski from the University of Texas. The first two books are on assembly language programming for the new Motorola 6812 16-bit microcontroller, and were written to be textbooks and professional references. This book was written at the request of the Motorola design team for the professional users of its new and very successful M·CORE chip microcontrollers. Written with the complete cooperation and input of the M·CORE design engineers at their headquarters in Austin, Texas, this book covers all aspects of the programming software and hardware of the M·CORE chip.* First introductory level book on the Motorola MoCORE* Teaches engineers how a computer executes instructions* Shows how a high-level programming language converts to assembler language* Teaches the reader how a microcontroller is interfaced to the outside world* Hundreds of examples are used throughout the text* Over 200 homework problems give the reader in-depth practice* A CD-ROM with HIWARE's C++ compiler is included with the book* A complete summary chapter on other available microcontrollers

Embedded Microcontroller Interfacing for M.CORE Systems

Handbook of Networked and Embedded Control Systems

The vast majority of control systems built today are embedded; that is, they rely on built-in, special-purpose digital computers to close their feedback loops. Embedded systems are common in aircraft, factories, chemical processing plants, and even in cars–a single high-end automobile may contain over eighty different computers. The design of embedded controllers and of the intricate, automated communication networks that support them raises many new questions—practical, as well as theoretical—about network protocols, compatibility of operating systems, and ways to maximize the effectiveness of the embedded hardware. This handbook, the first of its kind, provides engineers, computer scientists, mathematicians, and students a broad, comprehensive source of information and technology to address many questions and aspects of embedded and networked control. Separated into six main sections—Fundamentals, Hardware, Software, Theory, Networking, and Applications—this work unifies into a single reference many scattered articles, websites, and specification sheets. Also included are case studies, experiments, and examples that give a multifaceted view of the subject, encompassing computation and communication considerations.