Basic Emc Electromagnetic Compatibility Technology Advancement For C3 Systems Volume 4d Modeling Crosstalk In Balanced Twisted Pairs

Scientific and Technical Aerospace Reports

Basic EMC (Electromagnetic Compatibility) Technology Advancement for C3 Systems. Volume 4D. Modeling Crosstalk in Balanced Twisted Pairs

Electrical devices (computers, radar systems, communication radios, etc.) are interconnected by wires on most present systems. Electromagnetic fields produced by the excitation of these wires will cause unintentional coupling of signals onto nearby wires. This undesired electromagnetic coupling is termed crosswalk. It is important to be able to determine whether these crosstalk signals will cause the devices at the ends of the wires to malfunction. Wires are often grouped together in cable bundles or harnesses. The close proximity of wires in these bundles enhances the possibility that the crosstalk levels will be sufficiently large to cause malfunctions. The ability to predict crosstalk levels and the means to control crosstalk when it causes a problem are important to optimum system design. It interference of this type is allowed to surface during final system tests, a costly and time consuming retrofit of the wiring or the addition of filters and other interference control measures may be required.

Government Reports Annual Index