Applying The Split Adc Architecture To A 16 Bit 1 Ms S Differential Successive Approximation Analog To Digital Converter

Applying the "split-ADC" Architecture to a 16 Bit, 1 MS/s Differential Successive Approximation Analog-to-digital Converter

Abstract: Successive Approximation (SAR) analog-to-digital converters are used extensively in biomedical applications such as CAT scan due to the high resolution they offer. Capacitor mismatch in the SAR converter is a limiting factor for its accuracy and resolution. Without some form of calibration, a SAR converter can only achieve 10 bit accuracy. In industry, the CAL-DAC approach is a popular approach for calibrating the SAR ADC, but this approach requires significant test time. This thesis applies the "Split-ADC" architecture with a deterministic, digital, and background self-calibration algorithm to the SAR converter to minimize test time. In this approach, a single ADC is split into two independent halves. The two split ADCs convert the same input sample and produce two output codes. The ADC output is the average of these two output codes. The difference between these two codes is used as a calibration signal to estimate the errors of the calibration parameters in a modified Jacobi method. The estimates are used to update calibration parameters are updated in a negative feedback LMS procedure. The ADC is fully calibrated when the difference signal goes to zero on average. This thesis focuses on the specific implementation of the "Split-ADC" self-calibrating algorithm on a 16 bit, 1 MS/s differential SAR ADC. The ADC can be calibrated with 105 conversions. This represents an improvement of 3 orders of magnitude over existing statistically-based calibration algorithms. Simulation results show that the linearity of the calibrated ADC improves to within "1 LSB.

Basic Linear Design

Op Amps for Everyone

The operational amplifier ("op amp") is the most versatile and widely used type of analog IC, used in audio and voltage amplifiers, signal conditioners, signal converters, oscillators, and analog computing systems. Almost every electronic device uses at least one op amp. This book is Texas Instruments' complete professional-level tutorial and reference to operational amplifier theory and applications. Among the topics covered are basic op amp physics (including reviews of current and voltage division, Thevenin's theorem, and transistor models), idealized op amp operation and configuration, feedback theory and methods, single and dual supply operation, understanding op amp parameters, minimizing noise in op amp circuits, and practical applications such as instrumentation amplifiers, signal conditioning, oscillators, active filters, load and level conversions, and analog computing. There is also extensive coverage of circuit construction techniques, including circuit board design, grounding, input and output isolation, using decoupling capacitors, and frequency characteristics of passive components. The material in this book is applicable to all op amp ICs from all manufacturers, not just TI. Unlike textbook treatments of op amp theory that tend to focus on idealized op amp models and configuration, this title uses idealized models only when necessary to explain op amp theory. The bulk of this book is on real-world op amps and their applications; considerations such as thermal effects, circuit noise, circuit buffering, selection of appropriate op amps for a given application, and unexpected effects in passive components are all discussed in detail. *Published in conjunction with Texas Instruments *A single volume, professional-level guide to op amp theory and applications *Covers circuit board layout techniques for manufacturing op amp circuits.